Search the whole station

110v adapter plug: yellow 100-130V range, not a converter

News Article 2520

110V adapter plug: what it adapts and what it cannot

The adapter plug only adapts the connection type.

1 is only a 110v adapter plug, which is literally an adapter plug for 110V. To understand what it can do, one thing must be distinguished first: adapters, conversion cables, etc., only change the connection form, that is, how to arrange the pins and how to fasten the shell. It does not change the supply voltage, does not change the frequency, and does not increase the available current, grounding system or load rating.

Writing 110v adapter plug as 110v adaptor plug refers to the same thing, adapter and adaptor just have different spelling habits. Therefore, there is no difference in the capabilities of 110v plug adapter and 110v plug adaptor. Both allow the two interfaces to be plugged together and are not responsible for turning electricity into another 1.

110v converter plug, name band conversion is not equal to variable voltage

If you hold 1 110v converter plug in your hand and expect it to change the voltage, you will probably fail. Converters and adapter cables only change the connection type; they do not alter the voltage itself. Like 110v to 12v plug, which wants to reduce 110V to 12V, what really works is the transformer that can change the voltage. Moreover, even if a transformer or adapter is used, the differences in frequency, grounding, pole position and protection configuration will not be automatically resolved, and must be checked item by item.

In the industrial interface, 110V is on the yellow setting.

According to the color habit of IEC 60309, 110V falls in the identification range of 100V to 130V, and the finished product is usually made into yellow, which is separated from 200V to 250V blue and 380V to 480V red. To recognize the 110V interface, besides looking at yellow, it also depends on the clock position: in the common configuration of 50Hz or 60Hz, 2P E, 100V to 130V accessories adopt 4h position. Color is only an auxiliary means of identification and cannot replace the nameplate.

110V to 3-pin plug, referring to the polarity

110v to 3 pin plug is actually concerned about how many contacts there are. The three-pin often used in industrial interfaces is officially written as 2P E, that is, two current-carrying poles plus a protective conductor contact, 3 a total of main contacts, and this configuration is common for single-phase 110V. However, it is not enough to write only three needles. It does not explain whether it is single-phase or three-phase, nor does it explain how to arrange neutral line and protective grounding. 2P E, 3P E and 3P N E are three different conductor configurations. The number of contacts is similar and cannot be interchanged. The division of labor between neutral conductor and protective conductor cannot be mixed.

Self-made adapter, effectively bypasses the anti-misinsertion feature

Industrial interfaces distinguish different electrical configurations by protecting conductor contact position, clock position and structural key position in order to prevent insertion errors. Refitting across the current gear or voltage gear, such as cutting the key position, replacing the contact, or making 1 adapter that has not been verified, is tantamount to removing this layer of protection. The corresponding interface configurations of 110V, 220V to 240V, 380V to 415V systems are inherently different, and cannot be forcibly inserted because of similar colors and appearance.

Before placing your order, verify everything that needs to be verified at once.

Before choosing, think clearly, what needs to be solved is whether the interface is not aligned or the voltage is not aligned: it is the adapter's turn if the interface is not aligned, and it is the transformer that needs to be found if the voltage is not aligned. Whether switching or direct pairing, check the standard system, rated current, pole position, rated voltage, frequency, clock position and protection level. In the size system of IEC 60309, Series I commonly has ratings of 16A, 32A, 63A, 125A,Series II, 20A, 30A, 60A, 100A, etc. Two sets of numbers are close to each other and cannot be of the same specification. The same color only indicates that it may fall in the same voltage identification interval. Whether it can be inserted or not depends on the complete parameters. If you distinguish between changing the connection form and changing the voltage, you 1 know what the 110v adapter plug can and cannot do.

The prev: The next: