Search the whole station
The 16A 2P E IP44 industrial plug produced by DTCEE uses a new high-performance polymer and solid brass conductor, which provides excellent splash protection while ensuring 5000 stable plugging and unplugging. DTCEE is a source manufacturing plant with 30 years of experience. All core copper parts are self-produced and self-controlled, eliminating intermediate trade links for you and providing highly competitive bulk purchase prices and fast delivery.
Industrial plug 16a 2p ip44 is mainly used in workshop mobile patch panels, stage lighting and sound equipment, small food machinery and temporary power distribution on construction sites.
the pin is made of high-purity solid brass, and the conductivity is 15% higher than that of ordinary alloys, which can effectively reduce the temperature rise of the terminal during high-current operation and avoid the risk of softening or burning of the plastic shell due to heat.
refuse to use recycled plastic, use 100% new flame retardant nylon injection molding, impact strength up to IK08 level, even in the cold environment by heavy extrusion will not be broken, to ensure the safety of the construction site operation.
high-precision tolerance control is adopted at the joint of the shell, and the anti-aging rubber sealing ring is matched to effectively block spray water in all directions and solid foreign matters with a diameter greater than 1mm, ensuring uninterrupted power transmission in the wet workshop.
The internal jack structure has been fatigue tested and still maintains a tight clamping force after 5000 plugging and unplugging, thus solving the problem of poor contact or arc flashover caused by frequent use of ordinary plugs.
the terminal screw adopts anti-falling and quick wire withdrawal technology, the speed of installing a 16A 2P plug by a single electrician can increase the 20%, and the manual installation cost can be significantly saved in large-scale engineering matching.
The product can work normally under extreme temperatures of minus 30 degrees to 50 degrees, and the electrical performance does not deviate. It is especially suitable for cold chain logistics warehouses or outdoor unshielded construction environments.
| Technology Projects | Parameter Indicators | Meets standards |
| Product Type | Industrial plug | IEC 60309-2 |
| Wiring method | Screw crimping | Industry Standards |
| Ground wire position | 6-hour position (6h) | Internationally applicable |
| Insulation resistance | Greater than 5 megohms | Safety protection |
| electrical strength | 2500V for 1 minute | Breakdown test |
| Cable diameter range | 8 mm to 15 mm | Compatible Specifications |
| Flame retardant rating | UL94 V-2 | Fire prevention requirements |
suitable for long-term supply of factories, shopping malls and construction sites distributors, product certification and packaging specifications, easy to carry out secondary sales in hardware channels.
for the production of industrial extension cord, reel factory, provide standardized 16A connection plug-in, to ensure the electrical safety and durability of the whole product.
In view of the demand for frequent disassembly of performing arts activities, it provides a power connection scheme with high service life and plug resistance to avoid power failure accidents during the performance.
specifically for low-temperature refrigerated trucks, cold storage internal electrical equipment to provide anti-freeze, moisture-proof power interface, to solve the ordinary civilian plug at low temperatures easy to embrittlement leakage problems.
use wire stripping pliers to remove the outer sheath of the cable by about 4cm, and strip the core wire by 1cm to ensure that the copper wire is not scattered. It is recommended to cover the cold-pressed terminal.
insert the wires into the holes marked with L live wire, N zero wire and ground wire symbols respectively, and make sure that the ground wire is connected to the longest hole with identification.
Use a manual screwdriver to cross-tighten the terminal screws to ensure that every 1 wires cannot be pulled out manually to prevent excessive contact resistance from generating heat.
slide the inner core into the shell and buckle it, tighten the rear cable lock buckle, and ensure that the sealing ring fastens the cable to prevent dust and moisture from penetrating from the tail.
certificate
Welcome to our Frequently Asked Questions page. We have compiled answers to common questions you may have, hoping to provide you with clear and quick solutions. If you cannot find the information you need here, please feel free to contact our customer support team.
The 16A 2P E IP44 industrial plug produced by DTCEE uses a new high-performance polymer and solid brass conductor, which provides excellent splash protection while ensuring 5000 stable plugging and unplugging. DTCEE is a source manufacturing plant with 30 years of experience. All core copper parts are self-produced and self-controlled, eliminating intermediate trade links for you and providing highly competitive bulk purchase prices and fast delivery.
16A
Rated current
3 cores
Number of poles
230V
Rated voltage
the pin is made of high-purity solid brass, and the conductivity is 15% higher than that of ordinary alloys, which can effectively reduce the temperature rise of the terminal during high-current operation and avoid the risk of softening or burning of the plastic shell due to heat.
refuse to use recycled plastic, use 100% new flame retardant nylon injection molding, impact strength up to IK08 level, even in the cold environment by heavy extrusion will not be broken, to ensure the safety of the construction site operation.
high-precision tolerance control is adopted at the joint of the shell, and the anti-aging rubber sealing ring is matched to effectively block spray water in all directions and solid foreign matters with a diameter greater than 1mm, ensuring uninterrupted power transmission in the wet workshop.
The internal jack structure has been fatigue tested and still maintains a tight clamping force after 5000 plugging and unplugging, thus solving the problem of poor contact or arc flashover caused by frequent use of ordinary plugs.
the terminal screw adopts anti-falling and quick wire withdrawal technology, the speed of installing a 16A 2P plug by a single electrician can increase the 20%, and the manual installation cost can be significantly saved in large-scale engineering matching.
The product can work normally under extreme temperatures of minus 30 degrees to 50 degrees, and the electrical performance does not deviate. It is especially suitable for cold chain logistics warehouses or outdoor unshielded construction environments.
| Technology Projects | Parameter Indicators | Meets standards |
| Product Type | Industrial plug | IEC 60309-2 |
| Wiring method | Screw crimping | Industry Standards |
| Ground wire position | 6-hour position (6h) | Internationally applicable |
| Insulation resistance | Greater than 5 megohms | Safety protection |
| electrical strength | 2500V for 1 minute | Breakdown test |
| Cable diameter range | 8 mm to 15 mm | Compatible Specifications |
| Flame retardant rating | UL94 V-2 | Fire prevention requirements |
suitable for long-term supply of factories, shopping malls and construction sites distributors, product certification and packaging specifications, easy to carry out secondary sales in hardware channels.
for the production of industrial extension cord, reel factory, provide standardized 16A connection plug-in, to ensure the electrical safety and durability of the whole product.
In view of the demand for frequent disassembly of performing arts activities, it provides a power connection scheme with high service life and plug resistance to avoid power failure accidents during the performance.
specifically for low-temperature refrigerated trucks, cold storage internal electrical equipment to provide anti-freeze, moisture-proof power interface, to solve the ordinary civilian plug at low temperatures easy to embrittlement leakage problems.
use wire stripping pliers to remove the outer sheath of the cable by about 4cm, and strip the core wire by 1cm to ensure that the copper wire is not scattered. It is recommended to cover the cold-pressed terminal.
insert the wires into the holes marked with L live wire, N zero wire and ground wire symbols respectively, and make sure that the ground wire is connected to the longest hole with identification.
Use a manual screwdriver to cross-tighten the terminal screws to ensure that every 1 wires cannot be pulled out manually to prevent excessive contact resistance from generating heat.
slide the inner core into the shell and buckle it, tighten the rear cable lock buckle, and ensure that the sealing ring fastens the cable to prevent dust and moisture from penetrating from the tail.
datong
