Connector Industry Socket
Two DTCEE connector industry socket families support procurement shortlisting: IP67 DT235/DT245 quick-connect couplers rated 63A or 125A and IP67 high-current couplers rated 200A, 250A or 400A, each with a direct product link. The correct configuration depends on current, voltage, pole count, clock position, cable size, mating part and operating environment before quotation. These are industrial power connectors, not PCB, IC or memory sockets.
Connector Industry Socket
Connector Industry Socket Families Cover Different Current Ranges
The two selected industrial power connector families serve different current sizes and cannot be treated as interchangeable versions of one interface.
DT235 or DT245 covers the listed 63A or 125A five-pole coupling duty, while the separate high-current family covers listed 200A, 250A or 400A duties.
| Product Family | Published Selection Range |
|---|---|
| DT235 / DT245: | 63A or 125A, 400V, five poles and IP67; cable range is model-specific. |
| High-Current Coupler Family: | 200A, 250A or 400A, four or five poles and IP67; published models include a control signal pin. |
Compatible Orders Require Every Electrical And Installation Identifier
A connector industry socket can share a current rating with another product yet remain incompatible because its voltage, pole arrangement, keying or cable capacity differs.
The complete rating and mating set, rather than one headline value, must be confirmed before price approval or installation planning.
Current And Voltage
The required circuit current, nameplate voltage and frequency define the intended operating point.
Poles And Clock Position
The conductor arrangement and protective-earth position must match the mating connector.
Cable And Termination
Conductor cross-section, cable outside diameter, terminal capacity and strain relief require model-level confirmation.
Environment And Use State
Indoor, outdoor, dust, water, temperature, vibration and connected or closed-cover conditions define the protection requirement.
Industrial Power Sockets Are Not PCB Or IC Socket Connectors
The phrase connector industry socket also appears in searches for board-level electronic components, so the required voltage, current and installation scale must be identified first.
This range serves industrial power distribution and cable coupling, while PCB, IC, memory or pin-header sockets require an electronic-component product category.
Industrial Power Connection
Cable and equipment power coupling with ampere, voltage, pole, keying, sealing and conductor-size requirements.
Electronic Socket Connector
Board-level or device-internal connection for ICs, memory modules, pin headers or compact signal interfaces.
Recommended Connector Industry Socket Products
This selected connector industry socket range covers mobile IP67 couplers for 63A and 125A circuits plus separate IP67 high-current couplers for 200A, 250A and 400A connections. Each order is specified by its exact mating counterpart, voltage, poles and cable size.

High Current Industrial Connector Coupler
The model choice is based on the intended circuit, complete electrical rating and matching interface.
- Application / fitHigh-current industrial power connections
- Current / configuration200A / 250A / 400A; 4 or 5 poles
- MaterialBrass conductors; engineering-plastic housing
- InterfaceIP67; control signal pin

DT235 / DT245 Quick-Connect Industrial Coupler
The model choice is based on the intended circuit, complete electrical rating and matching interface.
- Application / fitMobile industrial power connection at 400V
- Current / configuration63A / 125A; 400V; 5 poles
- MaterialBrass conductors; engineering-plastic housing
- InterfaceIP67; 6–16 mm² or 16–50 mm² cable
Connector Industry Socket Commercial Terms
Samples, order quantities, prices, delivery dates, export terms and document scope are finalized against the selected model and destination.
Model and configuration first; sample availability, price, freight and timing are confirmed in writing.
Unit price, quantity, inspection and packing basis are recorded in the project quotation.
Quantity breaks, capacity allocation and replenishment timing depend on the confirmed model mix.
Standard products are typically stated as 7–15 days and custom products as 20–30 days; the order schedule is confirmed after configuration approval.
Incoterm, destination, freight, insurance and shipment split are confirmed for each export order.
The order document scope can include the datasheet, invoice, packing list, inspection record and model-specific conformity documents required for the destination.
Connector Industry Socket Custom Drawing Review
The drawing channel accepts a reference file when the project needs a reviewed housing, color, logo, packaging, cable or structural variation. Electrical ratings, keying and conformity scope remain subject to engineering confirmation.
Connector Industry Socket Buyer Questions
Approval covers interface limits, assembled protection, connection-cycle meaning and document scope.
Does A Higher Connector Rating Increase The Circuit Capacity?
No. The allowable circuit load remains limited by the cable, terminals, protective device, supply capacity and every mating component. A 400A connector does not upgrade a lower-rated cable or plug.
Can DT235 Or DT245 Mate With The High-Current Coupler Family?
No assumption should be made across these size families. DT235 and DT245 are 63A and 125A five-pole couplers, while the selected high-current family uses separate 200A, 250A and 400A interfaces and matching counterparts.
What Does IP67 Require After Installation?
The stated protection depends on the assembled condition, including intact seals, the correct cable entry, a fully engaged mating or cover state and closed unused entries. The final installation should be inspected before energization.
What Does The Published 5,000-Cycle Value Mean?
Both selected product pages publish 5,000 pluggable times as a mechanical connection-cycle value. It does not replace inspection of contact condition, terminal tightness, seals, locking parts and cable restraint during service.
Which Documents Can Be Specified With An Order?
The quotation can specify the applicable datasheet, commercial invoice, packing list, inspection record and model-specific conformity documents for the exact model and destination. A document for one variant should not be extended to another without scope confirmation.
Request A Connector Industry Socket Quote
A complete inquiry includes the model, current, voltage, poles, clock position, cable size, mating part, quantity and destination.
- Phone: +86 13336970867
- Email: info@dtcee.com
- WhatsApp: +86 13336970867
- Address: Henghe Industrial Zone, Panshi Town, Yueqing City, Zhejiang Province, China
DTCEE
